Blaster and Painter
Visa sponsorship
Trade · Perth, WA, Australia · Full-Time · $45/hr · Visa: Employer sponsored
An industrial services company in Perth, Western Australia is growing its workshop team. It needs skilled Blasters and Painters with proven industrial experience.
Surface preparation is as important as the final coating. This job is ideal if you agree. You will use industrial paint systems and modern workshop equipment. Your work will go to demanding industrial sectors.
The ad says eligible overseas candidates may be considered for sponsorship.
A good CV for this trade shows your blasting standards and your coating skills. Add the equipment you know well. make a Perth industrial blaster and painter CV with Build AI CV can help you make it clear.
Key Responsibilities
- Do industrial grit blasting and surface preparation
- Blast surfaces to the Sa 2.5 and Sa 3 cleanliness standards
- Prepare materials and surfaces for protective coating
- Apply zinc-rich primers and other industrial coating systems
- Apply high-build epoxy and polyurethane coatings
- Use airless and conventional spray-painting equipment
- Check and keep the correct coating thickness and use wet film gauges to monitor coating
- Complete stripe coating and other coating stages
- Make sure surfaces are clean enough before coating
- Follow QA/QC steps during blasting and painting
- Check and maintain painting and blasting equipment
- Fix problems in blasting equipment and the blast room
- Load and unload blasting trolleys
- Keep the work area clean, tidy and safe
Requirements & Eligibility
- You have minimum 3 years of industrial blasting and painting experience
- You have worked in an industrial surface treatment workshop, which is essential
- You can do abrasive blasting to Sa 2.5 and Sa 3 standards
- You know industrial paint and protective coating systems
- You have used zinc-rich primers, high-build epoxies and polyurethanes
- You use airless and conventional spray equipment with confidence
- You can apply coatings to the correct thickness
- You understand wet film measurement and coating quality control
- You know the full surface preparation and coating process
- You are good at troubleshooting and equipment maintenance
- You pay close attention to detail and your work is consistent
- A forklift licence is desirable and gantry or overhead crane experience is desirable
Apply: jobs@jobsabroad.vn · WhatsApp
Visa guide: Australia 482 Visa: Simple Guide